KEVIN 9.0 Process Advisor

Job + Geometry

Enter the job details and lens geometry before starting the analysis.

Run ID Technician Material Surface ShapeBack Surface Geometry

Aperture Diameter (mm) Center Thickness (mm) Edge Thickness (mm) Lens ROC (mm)

Recommended Polisher—calculated from lens geometry

Aspect Ratio—diameter ÷ thickness

Target Ratio—recommended polisher ÷ aperture

Flex Risk—pressure guardrail

Geometry Risk—mechanical influence assessment

Pad + Slurry

Select the pad and slurry currently being used on the machine.

Pad Type Pad Durometer

Slurry Baume Slurry pH

Current Machine Setup

Enter the machine settings currently running on the polisher.

Stroke Distance (mm) Bladder Pressure (PSI) Speed Factor (Auto) Cycle Time (min) Tool Speed (RPM) Part Speed (RPM)

Power / Radius of Curvature

Enter the measured and target power values for this optic.

Power Error Now Target Power Error Power Units ROC Now (mm) Target ROC (mm)

Power Gap—current − target

ROC Gap—current − target

Correction Severity—scales recommendation size

Irregularity / Form Error

Select the surface error pattern observed in the interferometer results.

Irregularity Now Target Irregularity Irregularity Units Priority

After the Run

Record the actual results after polishing so KEVIN can continue learning.

Actual Stroke Δ Actual Pressure Δ Actual Speed Δ Actual Time (min) Actual Polisher Used (mm) Power Error After (fringes) ROC After (mm) Irregularity After (fringes) KEVIN useful? Recommendation followed? Effectiveness Score

Technician Notes

Result Summary

No result calculated yet.

Run History

Review runs from this session or reload previous work.

Run	Pattern	Recommendation	Outcome
No runs logged.